KADOKAWA PLASTIC MODEL SERIES Full Metal Panic! 1/48 Arbalest Special Set
KK24181
Pre-Order
Full Metal Panic!
March 2027
This is a pre-order item with an estimated release date of March 2027.
Please review our Pre-order Policy to learn more about pre-order.
$159.99
$142.88
Free U.S. shipping and 10% off international shipping with no minimum purchase!
The Arbalest from Full Metal Panic! is here as a plastic model!
The AS (Arm Slave) Arbalest piloted by Sousuke Sagara in "Full Metal Panic!" joins the KADOKAWA PLASTIC MODEL SERIES! All of its tactical modes: Normal Mode, ECS Activation Mode, and Lambda Driver Activation Mode, can be fully recreated for the first time in plastic model form!
・Under the supervision of mechanical designer Kanetake Ebikawa, realistic mechanical details have been condensed into an approximately 177 mm-tall body.
・The model consists of parts made with colorful materials and pre-painted parts, enabling the completion of a realistic AS by simply assembling it.
・The movable mechanisms with wide ranges of articulation enable the recreation of iconic poses, including shooting and slashing poses.
・By deploying armor parts and exchanging parts, the ECS (Electronic Conceal System) Activation Mode can be fully recreated.
・The 42 lenses placed across the body are recreated with pre-painted parts.
・The Lambda Driver Activation Mode can be faithfully recreated by deploying armor parts and exchanging certain sections with heat-radiation fin parts.
・The cockpit opening/closing mechanism has been recreated based on the setting materials. The chest block slides forward, allowing the hatch to open and close.
・A wide variety of weapon parts are included, such as the "Boxer" 57mm Scattershot and Monomolecular Cutter featured in the series.
・The Anti-tank Daggers and Hand Grenades can be stored within the chest weapon bays.
・The Anti-tank Dagger mounted on the head can be recreated by exchanging head parts.
・Various hand parts are included: clenched fists, open, open (relaxed), Monomolecular Cutter-gripping, general weapon-gripping, and firearm-gripping hand parts.
*Nippers are required to assemble this product.
*The included figure requires painting.
*The images are of painted prototypes and may differ from the actual product.
Ready-to-assemble plastic model kit. 1/48 scale. Approximately 177mm in height.
・Wire Gun Firing State Recreation Parts
The firing state can be recreated by attaching the parts to the arm-mounted wire guns.
・Monomolecular Cutter Blade Part - Silver-Plated Ver.
A blade with a metallic, silver-plate finish is included.
・Lambda Driver Heat-Radiation Fin Parts - Black-Plated Ver.
Heat radiation fin parts with a solid black-plated finish are included.
・Special Display Base Designed by Kanetake Ebikawa
・A special display base designed by Kanetake Ebikawa is included.
This is a special-edition item with intricate designs on the base itself and even the support pillar.
A nameplate to further enhance displays is also included.
(Display base size: Approx. W160 × D120 × H10 mm)
・Special Packaging
A special sleeve that can store both the main package and the special set accessories is included. The cover features a newly drawn illustration by illustrator Naochika Morishita.
Product Contents
・Main model ×1
・Hand parts ×6 types
・"Boxer" 57mm Scattershot ×1
・Monomolecular Cutter ×1
・Anti-tank Daggers ×2
・Anti-tank Daggers (stored state) ×2
・Anti-tank Daggers (for head part) ×2
・Hand Grenades ×2
・ECS Mode recreation parts ×1 set
・Lambda Driver heat-radiation fin parts ×1 set
・Sousuke Sagara (pilot suit) Figure ×1 set
・Wire Gun firing state recreation parts x2
・Monomolecular Cutter Blade Part - Silver-Plated Ver. ×1
・Lambda Driver heat-radiation fin parts - Black-Plated Ver. ×1 set
・Special Display Base Designed by Kanetake Ebikawa ×1 set
・Limited-Edition Special Design Package
・Under the supervision of mechanical designer Kanetake Ebikawa, realistic mechanical details have been condensed into an approximately 177 mm-tall body.
・The model consists of parts made with colorful materials and pre-painted parts, enabling the completion of a realistic AS by simply assembling it.
・The movable mechanisms with wide ranges of articulation enable the recreation of iconic poses, including shooting and slashing poses.
・By deploying armor parts and exchanging parts, the ECS (Electronic Conceal System) Activation Mode can be fully recreated.
・The 42 lenses placed across the body are recreated with pre-painted parts.
・The Lambda Driver Activation Mode can be faithfully recreated by deploying armor parts and exchanging certain sections with heat-radiation fin parts.
・The cockpit opening/closing mechanism has been recreated based on the setting materials. The chest block slides forward, allowing the hatch to open and close.
・A wide variety of weapon parts are included, such as the "Boxer" 57mm Scattershot and Monomolecular Cutter featured in the series.
・The Anti-tank Daggers and Hand Grenades can be stored within the chest weapon bays.
・The Anti-tank Dagger mounted on the head can be recreated by exchanging head parts.
・Various hand parts are included: clenched fists, open, open (relaxed), Monomolecular Cutter-gripping, general weapon-gripping, and firearm-gripping hand parts.
*Nippers are required to assemble this product.
*The included figure requires painting.
*The images are of painted prototypes and may differ from the actual product.
Ready-to-assemble plastic model kit. 1/48 scale. Approximately 177mm in height.
・Wire Gun Firing State Recreation Parts
The firing state can be recreated by attaching the parts to the arm-mounted wire guns.
・Monomolecular Cutter Blade Part - Silver-Plated Ver.
A blade with a metallic, silver-plate finish is included.
・Lambda Driver Heat-Radiation Fin Parts - Black-Plated Ver.
Heat radiation fin parts with a solid black-plated finish are included.
・Special Display Base Designed by Kanetake Ebikawa
・A special display base designed by Kanetake Ebikawa is included.
This is a special-edition item with intricate designs on the base itself and even the support pillar.
A nameplate to further enhance displays is also included.
(Display base size: Approx. W160 × D120 × H10 mm)
・Special Packaging
A special sleeve that can store both the main package and the special set accessories is included. The cover features a newly drawn illustration by illustrator Naochika Morishita.
Product Contents
・Main model ×1
・Hand parts ×6 types
・"Boxer" 57mm Scattershot ×1
・Monomolecular Cutter ×1
・Anti-tank Daggers ×2
・Anti-tank Daggers (stored state) ×2
・Anti-tank Daggers (for head part) ×2
・Hand Grenades ×2
・ECS Mode recreation parts ×1 set
・Lambda Driver heat-radiation fin parts ×1 set
・Sousuke Sagara (pilot suit) Figure ×1 set
・Wire Gun firing state recreation parts x2
・Monomolecular Cutter Blade Part - Silver-Plated Ver. ×1
・Lambda Driver heat-radiation fin parts - Black-Plated Ver. ×1 set
・Special Display Base Designed by Kanetake Ebikawa ×1 set
・Limited-Edition Special Design Package